Shadow Base

Turbo/Turbocharger T3/T4 T04E. 63 A/R 57 Trim Stage 3 Compressor 400+Hp+

Turbo/Turbocharger T3/T4 T04E. 63 A/R 57 Trim Stage 3 Compressor 400+Hp+
Turbo/Turbocharger T3/T4 T04E. 63 A/R 57 Trim Stage 3 Compressor 400+Hp+
Turbo/Turbocharger T3/T4 T04E. 63 A/R 57 Trim Stage 3 Compressor 400+Hp+
Turbo/Turbocharger T3/T4 T04E. 63 A/R 57 Trim Stage 3 Compressor 400+Hp+
Turbo/Turbocharger T3/T4 T04E. 63 A/R 57 Trim Stage 3 Compressor 400+Hp+
Turbo/Turbocharger T3/T4 T04E. 63 A/R 57 Trim Stage 3 Compressor 400+Hp+
Turbo/Turbocharger T3/T4 T04E. 63 A/R 57 Trim Stage 3 Compressor 400+Hp+
Turbo/Turbocharger T3/T4 T04E. 63 A/R 57 Trim Stage 3 Compressor 400+Hp+

Turbo/Turbocharger T3/T4 T04E. 63 A/R 57 Trim Stage 3 Compressor 400+Hp+    Turbo/Turbocharger T3/T4 T04E. 63 A/R 57 Trim Stage 3 Compressor 400+Hp+
63 A/R 57 Trim Stage 3 Compressor 400+Hp+. This T3/T4 hybrid turbocharger assembly is created by installing a T4 compressor wheel and housing onto a T3 turbine housing, wheel and center section. A T3/T4 hybrid turbocharger assembly is a compromise for engines where a T3 turbocharger is too small to reach the desired maximum horsepower but using a T4 turbocharger would create an unacceptable amount of turbo lag. The T3/T4 turbocharger is designed to be used on engines displacing 1.6L-2.5L and is typically good for around 400HP. They are also commonly used in twin turbo applications. In this case those figures would be doubled 3.2L-5.0L engines up to 800HP. Horsepower ratings are generally meant to express the turbochargers maximum airflow capability. Recommended boost pressures are 7psi. 5 Bar to 21psi(1.5 Bar) and boost pressures should not exceed 30psi(2 Bar).

Exceeding 21psi(1.5 Bar) of boost pressure can significantly reduce a turbochargers lifespan. Generally speaking 14psi(1 Bar) is good for a 100% increase in horsepower from a naturally aspirated engine. Also factory non-turbo engines without forged internal components on high octane pump gas (91-92 octane) it is not recommended exceeding 7psi. Doing so could result in damaging your engine.

Capable of boosting horse power up to 300+ BHP. High quality material, cast housing with durable steel.

Standard T3 5 bolt downpipe flange pattern. Intake inlet & outlet: 3" & 2". Additional parts will be needed to complete install. Please consult professional turbo installer for details. Buyers outside of the U. Please check with your country's government website. Tracking numbers are available as soon as they are created and processed. Please note that we are not responsible for any kind of delay if P.

Box address or any other undeliverable addresses were provided. We do not offer local pick-ups. Replacements will not be sent until the claim is approved. Instructions are not included unless stated in the description.

It is highly recommended to seek professional installation as we are retailers of the parts and not trained technicians. We can provide minimal support, but do our best to support our customers. NOTE: All of universal and turbo parts may require slight modification in order to fits perfectly. Most aftermarket items are produced for off-road and/or show purpose only. These items are not suitable for regular driving.

User must follow the directions given and any misuse of this product is at his/her own risk. The manufacturers, distributors, and retailers will not be held responsible for using this item other than specified above. The item "Turbo/Turbocharger T3/T4 T04E. 63 A/R 57 Trim Stage 3 Compressor 400+Hp+" is in sale since Thursday, January 21, 2021.

This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Turbos, Nitrous, Superchargers\Turbo Chargers & Parts". The seller is "ajpdistributors" and is located in La Puente, California.

This item can be shipped worldwide.

  • Turbine Inducer: 65.50 / 55.90
  • Intake Inlet / Outlet: 3" Inlet & 2" Outlet
  • Warranty: Yes
  • Compressor Inducer: 50.50 / 76.00
  • Materials: Cast Iron/Steel Turbo Housing
  • Manufacturer Part Number: TBC-12130-335-H9
  • Compressor Trim: 55
  • Brand: AJP Distributors
  • Exhaust Turbo Manifold Flange: Standard T3/T4 4-Bolt
  • Exhaust Downpipe Flange: Standard T3 5-Bolt
  • Turbine Trim: 73
  • Turbine A/R: 0.63
  • Fitment: T3/T4 Manifold
  • Surface Finish: Cast Iron


Turbo/Turbocharger T3/T4 T04E. 63 A/R 57 Trim Stage 3 Compressor 400+Hp+    Turbo/Turbocharger T3/T4 T04E. 63 A/R 57 Trim Stage 3 Compressor 400+Hp+