This catalytic converter has been designed and manufactured to meet the Federal and Canada emission performance requirements specified by the United States EPA. This converter is NOT compliant with the regulations set forth by the California Air Resources Board. This converter is NOT compliant for vehicles with California emissions that are registered in the state of New York. MagnaFlow Universal Catalytic Converters form the basic building blocks for a comprehensive line of direct-fit applications. The main benefit of the universal catalytic converter is that one unit may cover a wide variety of vehicle makes and models.
Installing universal converters often requires the use of welding, cutting and tube bending equipment that is readily available to most professional installers. Under the conditions stated on the certificate, the catalytic converter is warranted for: A 50,000 miles for California exempted OBD-II converters; or B 25,000 miles on all other converters, from the date of installation. Others may employ one or two of the following features, but only Car Sound puts them all together to create a catalytic converter that exceeds basic need and function. Our years of research and development have resulted in many unique features that are exclusive to Car Sound. We combine efficient manufacturing techniques and state-of-the-art industrial design to produce an end process and product that sets, rather than meets, the highest standards of product performance andefficiency in the industry.
Car Sound converters have a ribbed body that minimizes expansion and distortion when the converter heats up. The ribs form a channel that protects the cushioning mat from direct exposure to exhaust gasses and they hold the ceramic catalyst in proper alignment. Car Sound converters have a 1/2 inch lap-joint where the necks meet the body.
The neck does not extend into the converter body where it could hamper exhaust flow. We maintain separate dies on different sized inlets. We do not skimp by putting larger neck sizes on smaller bodies. This would reduce the flow of the converter and reduce the quality of our product.
Car Sound uses a monolithic honeycomb catalyst. The ceramic is designed for maximum flow and surface area. The coating method is strictly controlled to maintain exact specifications. An improper coating could result in flow restrictions or an emission test failure. Car Sound uses a heavier gauge stainless steel, tip to tip.Others use mixed weights and materials. Car Sound converters are seam welded close to the converter body for a strong, tight bond. We do not weld along the edge which could allow the converter to expand like the folds in an accordion, allowing the catalyst to move around. Car Sound installs a factory capped, 90 degree air tube on converters for older vehicles that need air tubes. This saves time during installation. There is no need for additional labor to weld on an air tube or to create a bend when only an air tube stub is provided. Car Sound uses an aluminized or stainless OEM-style ribbed heat shield that creates a rigid wall of protection against heat and adds to the structural stability of the converter. The item "Magnaflow 91005 Universal High-Flow Catalytic Converter Oval 2.25 In/Out" is in sale since Tuesday, August 16, 2016. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Exhaust\Catalytic Converters". The seller is "dotcomparts" and is located in Kansas City, Missouri. This item can be shipped worldwide.