Jdm Ball Bearing T3 T4 T04E Turbo Charger Stage Iii. 63 A/R 5 Bolt Flange.63 A/R T04E Ball Bearing Turbo/Compressor Turbocharger Stage III. This T3/T4 hybrid turbocharger assembly is created by installing a T4 compressor wheel and housing onto a T3 turbine housing, wheel and center section. A T3/T4 hybrid turbocharger assembly is a compromise for engines where a T3 turbocharger is too small to reach the desired maximum horsepower but using a T4 turbocharger would create an unacceptable amount of turbo lag. The T3/T4 turbocharger is designed to be used on engines displacing 1.6L-2.5L and is typically good for around 400HP. They are also commonly used in twin turbo applications.
In this case those figures would be doubled 3.2L-5.0L engines up to 800HP. Horsepower ratings are generally meant to express the turbochargers maximum airflow capability.
Recommended boost pressures are 5psi. 5 Bar to 20psi(1.5 Bar) and boost pressures should not exceed 30psi(2 Bar).
Exceeding 20psi(1.5 Bar) of boost pressure can significantly reduce a turbochargers lifespan. Generally speaking 14psi(1 Bar) is good for a 100% increase in horsepower from a naturally aspirated engine. Also factory non-turbo engines without forged internal components on high octane pump gas (91-92 octane) it is not recommended exceeding 7psi.Doing so could result in damaging your engine. Capable of Boosting Horse Power up to 300+ BHP.
High Quality Material, Cast Housing with Durable Steel. Intake Inlet & Outlet: 3" & 2". 1 X T04E Ball Bearing Turbocharger. Hardware as Shown in the Picture Above.
Includes Internal Wastegate Port (Optional for Use). Can Modified To Use External Or Internal Wastegate. No Installation Guides Are Included, We Highly Recommend To Seek Professional Installation.Communication is very important and we will try our best to assist all our customers. Questions are answered in the order they arrive.
Questions will be answered as quickly as possible. Items may not always be in stock.Ground Carriers do not deliver to PO BOX and additional charges will be required. We cannot mark merchandise values below value or mark items as "gifts" - US and International Government Regulations prohibit such behavior. The customer is responsible for making any changes prior to purchasing. AK, GU, HI, PR, VI, APO/FPO, PO BOX. All return merchandise must be authorized and assigned with a RETURN AUTHORIZATION NUMBER R.
N from our customer service representatives before returning a product. It is the responsibility of the customer to repack the items for the return. Return labels are not given to return these items. We do not offer local pick-ups.
Replacements will not be sent until the claim is approved. Instructions are not included unless stated in the description.
We are retailers of the parts and are not trained technicians. We can provide minimal support, but we will try our best to help. NOTE : All of turbo parts and performance may require slight modification in order to fits perfectly.Most aftermarket items are produced for off-road or show purpose only. These items are not suitable for regular driving. User must follow the direction given and any misuse of this product is at his/her own risk. The item "Jdm Ball Bearing T3 T4 T04E Turbo Charger Stage Iii. 50.63 A/R 5 Bolt Flange" is in sale since Friday, January 17, 2020. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Turbos, Nitrous, Superchargers\Turbo Chargers & Parts". The seller is "ajpdistributors" and is located in La Puente, California.
This item can be shipped worldwide.