Shadow Base

For Nissan SR20DET GT2871 Dual Ball Bearing T25 Flange Turbo. 60 AR Compressor

For Nissan SR20DET GT2871 Dual Ball Bearing T25 Flange Turbo. 60 AR Compressor
For Nissan SR20DET GT2871 Dual Ball Bearing T25 Flange Turbo. 60 AR Compressor
For Nissan SR20DET GT2871 Dual Ball Bearing T25 Flange Turbo. 60 AR Compressor
For Nissan SR20DET GT2871 Dual Ball Bearing T25 Flange Turbo. 60 AR Compressor

For Nissan SR20DET GT2871 Dual Ball Bearing T25 Flange Turbo. 60 AR Compressor  For Nissan SR20DET GT2871 Dual Ball Bearing T25 Flange Turbo. 60 AR Compressor
For Nissan SR20DET GT2871 Dual Ball Bearing T25 Flange Turbo. GT2871R T25 Dual Ball Bearing Turbocharger 5-Bolt Flange with Internal Wastegate. This GT28 71R Dual Ball Bearing turbocharger assembly is designed to be used on engines displacing 1.8L-3.0L and is typically good for around 400HP. They are also commonly used in twin turbo applications.

In this case those figures would be doubled 3.6L-6.0L engines up to 800HP. Horsepower ratings are generally meant to express the turbochargers maximum airflow capability. Recommended boost pressures are 7psi.

5 Bar to 21psi (1.5 Bar) and boost pressures should not exceed 30psi (2 Bar). Exceeding 21psi (1.5 Bar) of boost pressure can significantly reduce a turbochargers lifespan. Generally speaking 14psi (1 Bar) is good for a 100% increase in horsepower from a naturally aspirated engine. Also factory non-turbo engines without forged internal components on high octane pump gas (91-92 octane) it is not recommended exceeding 7psi.

Doing so could result in damaging your engine. Capable of Boosting Horsepower Significantly.

Constructed with High Quality Material: Cast Aluminum & Iron. Intake Inlet & Outlet: 3" & 2". 1x GT2871R T25 5-Bolt Flange Dual Ball Bearing Turbocharger.

Hardware as Shown in the Picture Above. No Installation Guides Are Included, We Highly Recommend To Seek Professional Installation. Universal Fitment - (Recommended for 1.8L-3.0L Small Displacement Engines). Communication is very important and we will try our best to assist all our customers with any concerns. And we will reply to your message.

Questions are answered in the order they arrive as quickly as possilble. Ground Carriers do not deliver to PO BOX and additional charges will be required. We cannot mark merchandise values below value or mark items as "gifts" - US and International Government Regulations prohibit such behavior.

The customer is responsible for making any changes prior to purchasing. All return merchandise must be authorized and assigned with a RETURN AUTHORIZATION NUMBER R. N from our customer service representatives before returning a product.

It is the responsibility of the customer to repack the items for the return. Return labels are not given to return these items. We do not offer local pick-ups. Replacements will not be sent until the claim is approved.

Instructions are not included unless stated in the description. We are retailers of the parts and are not trained technicians. We can provide minimal support, but we will try our best to help. NOTE : All of turbo parts and performance may require slight modification in order to fits perfectly.

Most aftermarket items are produced for off-road or show purpose only. These items are not suitable for regular driving. User must follow the direction given and any misuse of this product is at his/her own risk. The item "For Nissan SR20DET GT2871 Dual Ball Bearing T25 Flange Turbo.

60 AR Compressor" is in sale since Thursday, February 4, 2021. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Turbos, Nitrous, Superchargers\Turbo Chargers & Parts". The seller is "epartsgogo" and is located in La Puente, California.

This item can be shipped worldwide.

  • Installation Guide: Not Included; Professional installation is highly recommended
  • Intake Inlet / Outlet: 3" / 2"
  • Brand Type: Aftermarket Branded
  • Compressor Inducer / Exducer: 53.00 / 71.00
  • Compressor Trim: 56
  • Placement on Vehicle: Front, Left, Right, Rear
  • Specifics: Additional Items / Modification Might Be Required to Install
  • Exhaust Downpipe Flange: Standard T25 5-Bolt
  • Turbine Trim: 76
  • Turbine A/R: 0.64
  • Compressor A/R: 0.60
  • Notes: Recommended for 1.8L-3.0L Small Displacement Engines
  • Other Part Number: Racing Track Drag Oil Cooled T25 Upgrade JDM Wastegate Waste Gate
  • Warranty: Yes
  • Fitment Type: Performance/Custom
  • Bearing Type: Dual Ball Bearing
  • Manufacturer Part Number: TBC-32251-476-E0
  • Turbine Inducer / Exducer: 53.00 / 47.00
  • Quantity: 1x GT2871R Dual Ball Bearing Turbocharger with Internal Wastegate
  • Material: Cast Iron / Steel Turbo Housing / Aluminum Controller
  • Brand: Epartsgogo
  • Type: Turbo Charger
  • Interchange Part Number: High Boost Performance Turbine Turbo Turbocharger Charger HP Gain
  • Compatible/Replacement For: Universal T25 Manifold Applications
  • Exhaust Turbo Manifold Flange: Standard T25 4-Bolt


For Nissan SR20DET GT2871 Dual Ball Bearing T25 Flange Turbo. 60 AR Compressor  For Nissan SR20DET GT2871 Dual Ball Bearing T25 Flange Turbo. 60 AR Compressor